SAE J2179 A Test for Evaluating the Rearward Amplication of Multi-Articulated Vehicles

作者:标准资料网 时间:2024-05-16 23:48:28   浏览:8788   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE J2179
Title:A Test for Evaluating the Rearward Amplication of Multi-Articulated Vehicles
Issuing Committee:Truck And Bus Advanced And Hybrid Powertrain Steering Comm
Scope:The procedure applies to heavy vehicles weighing more than 11 800 kg (26 000 lb) and particularly to those vehicles having two or more articulation joints that allow rotation in a horizontal plane. The procedure pertains to the lateral directional response of multi-articulated vehicles in avoidance maneuvers performed at highway speeds without braking.This test procedure is intended to be used for determining the rearward amplification and dynamic offtracking qualities of multi-trailer commercial vehicles (heavy trucks and buses).
下载地址: 点击此处下载
基本信息
标准名称:公路护栏用镀锌钢丝绳
英文名称:The galvanized steel wire ropes for highway guardrail
中标分类: 冶金 >> 钢铁产品 >> 钢丝、钢丝绳
ICS分类: 冶金 >> 钢铁产品 >> 钢丝、钢丝绳和环节链
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2010-12-23
实施日期:2011-09-01
首发日期:2010-12-23
作废日期:
主管部门:全国钢标准化技术委员会(SAC/TC 183)
提出单位:中国钢铁工业协会
归口单位:全国钢标准化技术委员会(SAC/TC 183)
起草单位:南通神威钢绳有限公司、国家金属制品质量监督检验中心、通辽钢丝绳厂、南通市产品质量监督检验所、冶金工业信息标准研究院
起草人:陶荣、张平萍、王忠林、王玲君、刘伟、陈建豪、洪涛、任翠英
出版社:中国标准出版社
出版日期:2011-09-01
页数:20页
适用范围

本标准规定了公路护栏用镀锌钢丝绳的分类、订货内容、材料、技术要求、检查、试验、检验规则、复验与判定、包装、标志及质量证明书等。
本标准适用于公路护栏用镀锌钢丝绳。

前言

没有内容

目录

没有内容

引用标准

下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件,仅注日期的版本适用于本文件。凡是不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。
GB/T228.1 金属材料 拉伸试验 第1部分:室温试验方法(GB/T228.1—2010,ISO6892-1:2009,MOD)
GB/T1839 钢产品镀锌层质量试验方法(GB/T1839—2008,ISO1460—1992,MOD)
GB/T2104—2008 钢丝绳包装、标志及质量证明书的一般规定
GB/T2976 金属材料 线材 缠绕试验方法(GB/T2976—2004,ISO7802:1983,IDT)
GB/T4354 优质碳素钢热轧盘条
GB/T8170 数值修约规则与极限数值的表示和判定
GB/T8358 钢丝绳破断拉伸试验方法(GB/T8358—2006,ISO3108:1974,NEQ)
GB/T8706 钢丝绳 术语、标记和分类(GB/T8706—2006,ISO17893:2004,IDT)
GB/T21965 钢丝绳 验收及缺陷术语(GB/T21965—2008,ISO2532:1974,NEQ)
GB/T24242.2 制丝用非合金钢盘条 第2 部分 一般用途盘条(GB/T24242.2—2009,ISO16120-2:2001,MOD)

所属分类: 冶金 钢铁产品 钢丝 钢丝绳 冶金 钢铁产品 钢丝 钢丝绳和环节链
【英文标准名称】:Lightingofroadtunnelsandunderpasses-Part2:Calculationandmeasurement
【原文标准名称】:公路隧道和地下隧道的照明.第2部分:计算和测量
【标准号】:DIN67524-2-2011
【标准状态】:现行
【国别】:德国
【发布日期】:2011-06
【实施或试行日期】:
【发布单位】:德国标准化学会(DE-DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:Carriageways;Control;Definitions;Density;Glare;Illuminance;Illuminationengineering;Lightingplants;Lightingsystems;Locations;Luminaires;Luminance;Mathematicalcalculations;Measurement;Measuringinstruments;Measuringtechniques;Planning;Roadconstruction;Roadlighting;Roads;Streetlighting;Subways;Trafficsectors;Transportfacilities(constructionworks);Transportationsafety;Tunnels
【摘要】:
【中国标准分类号】:K73
【国际标准分类号】:93_080_40
【页数】:19P.;A4
【正文语种】:德语